BIROn - Birkbeck Institutional Research Online

    Influence of pH and temperature on alunite dissolution: rates, products and insights on mechanisms from atomistic simulation

    Acero, Patricia and Hudson-Edwards, Karen A. and Gale, J.D. (2015) Influence of pH and temperature on alunite dissolution: rates, products and insights on mechanisms from atomistic simulation. Chemical Geology 419 (25), pp. 1-9. ISSN 0009-2541.

    Full text not available from this repository.

    Abstract

    The processes, rates, controlling factors and products of alunite (KAl3(SO4)2(OH)6) dissolution were assessed using batch dissolution experiments at pHs of c. 3, 4, 4.6, 7 and 8, and temperatures of c. 280, 293 and 313 K. Alunite dissolution is roughly congruent at pH 3, while at pH ≥ 3.9 the process is incongruent, giving a lower Al/K ratio in solution than in the pristine alunite sample. The decrease in the Al/K ratio appears to be caused by precipitation of secondary aluminium sulfate/hydroxysulfate minerals coating the surface of the dissolving alunite, as inferred from SEM images and XPS determinations, but these minerals do not passivate the alunite surface for the time frame of the experiments (up to 400 h). The lowest dissolution rates are obtained for pH 4.6 and 280 K. Both the temperature increase and any pH variation from that point lead to faster dissolution rates. Based on the potassium release to solution, the influence of pH and temperature on the alunite dissolution rate for pH of 4.8 and below can be expressed as; View the MathML source Turn MathJax on where rateK is the alunite dissolution rate (in mol·m− 2·s− 1); aH+ is the activity of hydrogen ions in solution; R is the Universal gas constant (in kJ·mol− 1·K− 1) and T is temperature (in K). For pH of 4.6 and above, the alunite dissolution rate can instead be expressed as; where aOH- is the activity of hydroxyl ions in solution. In light of the calculated values for the activation energy under the two sets of pH conditions (32 ± 3 and 39 ± 4 kJ·mol− 1), alunite dissolution appears to be surface-controlled. Examination of the most stable solvated alunite surfaces obtained by atomistic computer simulations suggests that the least energetically favourable steps during alunite dissolution are the detachment of either Al atoms or SO4 tetrahedra from exposed surfaces. Thus, these processes are most probably the rate-determining steps in alunite dissolution.

    Metadata

    Item Type: Article
    School: Birkbeck Schools and Departments > School of Science > Earth and Planetary Sciences
    Depositing User: Sarah Hall
    Date Deposited: 24 May 2016 15:32
    Last Modified: 29 Jun 2017 09:18
    URI: http://eprints.bbk.ac.uk/id/eprint/15319

    Statistics

    Downloads
    Activity Overview
    0Downloads
    227Hits

    Additional statistics are available via IRStats2.

    Archive Staff Only (login required)

    Edit/View Item Edit/View Item